Attribute Reference¶
This chapter shows all the attributes that can be set to control the behavior of VisIt. The attributes themselves are not documented, but their names are usually quite explanatory. When a member of an attribute can take values from a given list of options, the default option is printed first in italic followed by a comma separated list of the other available options.
The listing is ordered in alphabetical ordering of the name of the attribute set. For each set the function that will provide you with these attributes is printed in italic.
Many functions return an integer where 1 means success and 0 means failure. This behavior is represented by the type CLI_return_t in an attempt to distinguish it from functions that may utilize the full range of integers. | |
AMRStitchCell: AMRStitchCellAttributes()¶
Attribute Default/Allowed Values CreateCellsOfType DualGridAndStitchCells, DualGrid, StitchCells
Animation: AnimationAttributes()¶
Attribute Default/Allowed Values animationMode StopMode, ReversePlayMode, PlayMode pipelineCachingMode 0 frameIncrement 1 timeout 1 playbackMode PlayOnce, Looping, Swing
Annotation: AnnotationAttributes()¶
Attribute Default/Allowed Values axes2D.visible 1 axes2D.autoSetTicks 1 axes2D.autoSetScaling 1 axes2D.lineWidth 0 axes2D.tickLocation Outside, Inside, Both axes2D.tickAxes BottomLeft, Off, Bottom, Left, All axes2D.xAxis.title.visible 1 axes2D.xAxis.title.font.font Courier, Arial, Times axes2D.xAxis.title.font.scale 1 axes2D.xAxis.title.font.useForegroundColor 1 axes2D.xAxis.title.font.color (0, 0, 0, 255) axes2D.xAxis.title.font.bold 1 axes2D.xAxis.title.font.italic 1 axes2D.xAxis.title.userTitle 0 axes2D.xAxis.title.userUnits 0 axes2D.xAxis.title.title “X-Axis” axes2D.xAxis.title.units “” axes2D.xAxis.label.visible 1 axes2D.xAxis.label.font.font Courier, Arial, Times axes2D.xAxis.label.font.scale 1 axes2D.xAxis.label.font.useForegroundColor 1 axes2D.xAxis.label.font.color (0, 0, 0, 255) axes2D.xAxis.label.font.bold 1 axes2D.xAxis.label.font.italic 1 axes2D.xAxis.label.scaling 0 axes2D.xAxis.tickMarks.visible 1 axes2D.xAxis.tickMarks.majorMinimum 0 axes2D.xAxis.tickMarks.majorMaximum 1 axes2D.xAxis.tickMarks.minorSpacing 0.02 axes2D.xAxis.tickMarks.majorSpacing 0.2 axes2D.xAxis.grid 0 axes2D.yAxis.title.visible 1 axes2D.yAxis.title.font.font Courier, Arial, Times axes2D.yAxis.title.font.scale 1 axes2D.yAxis.title.font.useForegroundColor 1 axes2D.yAxis.title.font.color (0, 0, 0, 255) axes2D.yAxis.title.font.bold 1 axes2D.yAxis.title.font.italic 1 axes2D.yAxis.title.userTitle 0 axes2D.yAxis.title.userUnits 0 axes2D.yAxis.title.title “Y-Axis” axes2D.yAxis.title.units “” axes2D.yAxis.label.visible 1 axes2D.yAxis.label.font.font Courier, Arial, Times axes2D.yAxis.label.font.scale 1 axes2D.yAxis.label.font.useForegroundColor 1 axes2D.yAxis.label.font.color (0, 0, 0, 255) axes2D.yAxis.label.font.bold 1 axes2D.yAxis.label.font.italic 1 axes2D.yAxis.label.scaling 0 axes2D.yAxis.tickMarks.visible 1 axes2D.yAxis.tickMarks.majorMinimum 0 axes2D.yAxis.tickMarks.majorMaximum 1 axes2D.yAxis.tickMarks.minorSpacing 0.02 axes2D.yAxis.tickMarks.majorSpacing 0.2 axes2D.yAxis.grid 0 axes3D.visible 1 axes3D.autoSetTicks 1 axes3D.autoSetScaling 1 axes3D.lineWidth 0 axes3D.tickLocation Inside, Outside, Both axes3D.axesType ClosestTriad, FurthestTriad, OutsideEdges, StaticTriad, StaticEdges axes3D.triadFlag 1 axes3D.bboxFlag 1 axes3D.xAxis.title.visible 1 axes3D.xAxis.title.font.font Arial, Courier, Times axes3D.xAxis.title.font.scale 1 axes3D.xAxis.title.font.useForegroundColor 1 axes3D.xAxis.title.font.color (0, 0, 0, 255) axes3D.xAxis.title.font.bold 0 axes3D.xAxis.title.font.italic 0 axes3D.xAxis.title.userTitle 0 axes3D.xAxis.title.userUnits 0 axes3D.xAxis.title.title “X-Axis” axes3D.xAxis.title.units “” axes3D.xAxis.label.visible 1 axes3D.xAxis.label.font.font Arial, Courier, Times axes3D.xAxis.label.font.scale 1 axes3D.xAxis.label.font.useForegroundColor 1 axes3D.xAxis.label.font.color (0, 0, 0, 255) axes3D.xAxis.label.font.bold 0 axes3D.xAxis.label.font.italic 0 axes3D.xAxis.label.scaling 0 axes3D.xAxis.tickMarks.visible 1 axes3D.xAxis.tickMarks.majorMinimum 0 axes3D.xAxis.tickMarks.majorMaximum 1 axes3D.xAxis.tickMarks.minorSpacing 0.02 axes3D.xAxis.tickMarks.majorSpacing 0.2 axes3D.xAxis.grid 0 axes3D.yAxis.title.visible 1 axes3D.yAxis.title.font.font Arial, Courier, Times axes3D.yAxis.title.font.scale 1 axes3D.yAxis.title.font.useForegroundColor 1 axes3D.yAxis.title.font.color (0, 0, 0, 255) axes3D.yAxis.title.font.bold 0 axes3D.yAxis.title.font.italic 0 axes3D.yAxis.title.userTitle 0 axes3D.yAxis.title.userUnits 0 axes3D.yAxis.title.title “Y-Axis” axes3D.yAxis.title.units “” axes3D.yAxis.label.visible 1 axes3D.yAxis.label.font.font Arial, Courier, Times axes3D.yAxis.label.font.scale 1 axes3D.yAxis.label.font.useForegroundColor 1 axes3D.yAxis.label.font.color (0, 0, 0, 255) axes3D.yAxis.label.font.bold 0 axes3D.yAxis.label.font.italic 0 axes3D.yAxis.label.scaling 0 axes3D.yAxis.tickMarks.visible 1 axes3D.yAxis.tickMarks.majorMinimum 0 axes3D.yAxis.tickMarks.majorMaximum 1 axes3D.yAxis.tickMarks.minorSpacing 0.02 axes3D.yAxis.tickMarks.majorSpacing 0.2 axes3D.yAxis.grid 0 axes3D.zAxis.title.visible 1 axes3D.zAxis.title.font.font Arial, Courier, Times axes3D.zAxis.title.font.scale 1 axes3D.zAxis.title.font.useForegroundColor 1 axes3D.zAxis.title.font.color (0, 0, 0, 255) axes3D.zAxis.title.font.bold 0 axes3D.zAxis.title.font.italic 0 axes3D.zAxis.title.userTitle 0 axes3D.zAxis.title.userUnits 0 axes3D.zAxis.title.title “Z-Axis” axes3D.zAxis.title.units “” axes3D.zAxis.label.visible 1 axes3D.zAxis.label.font.font Arial, Courier, Times axes3D.zAxis.label.font.scale 1 axes3D.zAxis.label.font.useForegroundColor 1 axes3D.zAxis.label.font.color (0, 0, 0, 255) axes3D.zAxis.label.font.bold 0 axes3D.zAxis.label.font.italic 0 axes3D.zAxis.label.scaling 0 axes3D.zAxis.tickMarks.visible 1 axes3D.zAxis.tickMarks.majorMinimum 0 axes3D.zAxis.tickMarks.majorMaximum 1 axes3D.zAxis.tickMarks.minorSpacing 0.02 axes3D.zAxis.tickMarks.majorSpacing 0.2 axes3D.zAxis.grid 0 axes3D.setBBoxLocation 0 axes3D.bboxLocation (0, 1, 0, 1, 0, 1) axes3D.triadColor (0, 0, 0) axes3D.triadLineWidth 1 axes3D.triadFont 0 axes3D.triadBold 1 axes3D.triadItalic 1 axes3D.triadSetManually 0 userInfoFlag 1 userInfoFont.font Arial, Courier, Times userInfoFont.scale 1 userInfoFont.useForegroundColor 1 userInfoFont.color (0, 0, 0, 255) userInfoFont.bold 0 userInfoFont.italic 0 databaseInfoFlag 1 timeInfoFlag 1 databaseInfoFont.font Arial, Courier, Times databaseInfoFont.scale 1 databaseInfoFont.useForegroundColor 1 databaseInfoFont.color (0, 0, 0, 255) databaseInfoFont.bold 0 databaseInfoFont.italic 0 databaseInfoExpansionMode File, Directory, Full, Smart, SmartDirectory databaseInfoTimeScale 1 databaseInfoTimeOffset 0 legendInfoFlag 1 backgroundColor (255, 255, 255, 255) foregroundColor (0, 0, 0, 255) gradientBackgroundStyle Radial, TopToBottom, BottomToTop, LeftToRight, RightToLeft gradientColor1 (0, 0, 255, 255) gradientColor2 (0, 0, 0, 255) backgroundMode Solid, Gradient, Image, ImageSphere backgroundImage “” imageRepeatX 1 imageRepeatY 1 axesArray.visible 1 axesArray.ticksVisible 1 axesArray.autoSetTicks 1 axesArray.autoSetScaling 1 axesArray.lineWidth 0 axesArray.axes.title.visible 1 axesArray.axes.title.font.font Arial, Courier, Times axesArray.axes.title.font.scale 1 axesArray.axes.title.font.useForegroundColor 1 axesArray.axes.title.font.color (0, 0, 0, 255) axesArray.axes.title.font.bold 0 axesArray.axes.title.font.italic 0 axesArray.axes.title.userTitle 0 axesArray.axes.title.userUnits 0 axesArray.axes.title.title “” axesArray.axes.title.units “” axesArray.axes.label.visible 1 axesArray.axes.label.font.font Arial, Courier, Times axesArray.axes.label.font.scale 1 axesArray.axes.label.font.useForegroundColor 1 axesArray.axes.label.font.color (0, 0, 0, 255) axesArray.axes.label.font.bold 0 axesArray.axes.label.font.italic 0 axesArray.axes.label.scaling 0 axesArray.axes.tickMarks.visible 1 axesArray.axes.tickMarks.majorMinimum 0 axesArray.axes.tickMarks.majorMaximum 1 axesArray.axes.tickMarks.minorSpacing 0.02 axesArray.axes.tickMarks.majorSpacing 0.2 axesArray.axes.grid 0
Axis: AxisAttributes()¶
Attribute Default/Allowed Values title.visible 1 title.font.font Arial, Courier, Times title.font.scale 1 title.font.useForegroundColor 1 title.font.color (0, 0, 0, 255) title.font.bold 0 title.font.italic 0 title.userTitle 0 title.userUnits 0 title.title “” title.units “” label.visible 1 label.font.font Arial, Courier, Times label.font.scale 1 label.font.useForegroundColor 1 label.font.color (0, 0, 0, 255) label.font.bold 0 label.font.italic 0 label.scaling 0 tickMarks.visible 1 tickMarks.majorMinimum 0 tickMarks.majorMaximum 1 tickMarks.minorSpacing 0.02 tickMarks.majorSpacing 0.2 grid 0
AxisAlignedSlice4D: AxisAlignedSlice4DAttributes()¶
Attribute Default/Allowed Values I () J () K () L ()
Boundary: BoundaryAttributes()¶
Attribute Default/Allowed Values colorType ColorByMultipleColors, ColorBySingleColor, ColorByColorTable colorTableName “Default” invertColorTable 0 legendFlag 1 lineWidth 0 singleColor (0, 0, 0, 255) boundaryNames () opacity 1 wireframe 0 smoothingLevel 0
Box: BoxAttributes()¶
Attribute Default/Allowed Values amount Some, All minx 0 maxx 1 miny 0 maxy 1 minz 0 maxz 1 inverse 0
CartographicProjection: CartographicProjectionAttributes()¶
Attribute Default/Allowed Values projectionID aitoff, eck4, eqdc, hammer, laea, lcc, merc, mill, moll, ortho, wink2 centralMeridian 0
Clip: ClipAttributes()¶
Attribute Default/Allowed Values quality Fast, Accurate funcType Plane, Sphere plane1Status 1 plane2Status 0 plane3Status 0 plane1Origin (0, 0, 0) plane2Origin (0, 0, 0) plane3Origin (0, 0, 0) plane1Normal (1, 0, 0) plane2Normal (0, 1, 0) plane3Normal (0, 0, 1) planeInverse 0 planeToolControlledClipPlane Plane1, None, Plane2, Plane3 center (0, 0, 0) radius 1 sphereInverse 0
Cone: ConeAttributes()¶
Attribute Default/Allowed Values angle 45 origin (0, 0, 0) normal (0, 0, 1) representation Flattened, ThreeD, R_Theta upAxis (0, 1, 0) cutByLength 0 length 1
ConnectedComponents: ConnectedComponentsAttributes()¶
Attribute Default/Allowed Values EnableGhostNeighborsOptimization 1
ConstructDataBinning: ConstructDataBinningAttributes()¶
Attribute Default/Allowed Values name “” varnames () binType () binBoundaries () reductionOperator Average, Minimum, Maximum, StandardDeviation, Variance, Sum, Count, RMS, PDF varForReductionOperator “” undefinedValue 0 binningScheme Uniform, Unknown numBins () overTime 0 timeStart 0 timeEnd 1 timeStride 1 outOfBoundsBehavior Clamp, Discard
Contour: ContourAttributes()¶
Attribute Default/Allowed Values defaultPalette.GetControlPoints(0).colors (255, 0, 0, 255) defaultPalette.GetControlPoints(0).position 0 defaultPalette.GetControlPoints(1).colors (0, 255, 0, 255) defaultPalette.GetControlPoints(1).position 0.034 defaultPalette.GetControlPoints(2).colors (0, 0, 255, 255) defaultPalette.GetControlPoints(2).position 0.069 defaultPalette.GetControlPoints(3).colors (0, 255, 255, 255) defaultPalette.GetControlPoints(3).position 0.103 defaultPalette.GetControlPoints(4).colors (255, 0, 255, 255) defaultPalette.GetControlPoints(4).position 0.138 defaultPalette.GetControlPoints(5).colors (255, 255, 0, 255) defaultPalette.GetControlPoints(5).position 0.172 defaultPalette.GetControlPoints(6).colors (255, 135, 0, 255) defaultPalette.GetControlPoints(6).position 0.207 defaultPalette.GetControlPoints(7).colors (255, 0, 135, 255) defaultPalette.GetControlPoints(7).position 0.241 defaultPalette.GetControlPoints(8).colors (168, 168, 168, 255) defaultPalette.GetControlPoints(8).position 0.276 defaultPalette.GetControlPoints(9).colors (255, 68, 68, 255) defaultPalette.GetControlPoints(9).position 0.31 defaultPalette.GetControlPoints(10).colors (99, 255, 99, 255) defaultPalette.GetControlPoints(10).position 0.345 defaultPalette.GetControlPoints(11).colors (99, 99, 255, 255) defaultPalette.GetControlPoints(11).position 0.379 defaultPalette.GetControlPoints(12).colors (40, 165, 165, 255) defaultPalette.GetControlPoints(12).position 0.414 defaultPalette.GetControlPoints(13).colors (255, 99, 255, 255) defaultPalette.GetControlPoints(13).position 0.448 defaultPalette.GetControlPoints(14).colors (255, 255, 99, 255) defaultPalette.GetControlPoints(14).position 0.483 defaultPalette.GetControlPoints(15).colors (255, 170, 99, 255) defaultPalette.GetControlPoints(15).position 0.517 defaultPalette.GetControlPoints(16).colors (170, 79, 255, 255) defaultPalette.GetControlPoints(16).position 0.552 defaultPalette.GetControlPoints(17).colors (150, 0, 0, 255) defaultPalette.GetControlPoints(17).position 0.586 defaultPalette.GetControlPoints(18).colors (0, 150, 0, 255) defaultPalette.GetControlPoints(18).position 0.621 defaultPalette.GetControlPoints(19).colors (0, 0, 150, 255) defaultPalette.GetControlPoints(19).position 0.655 defaultPalette.GetControlPoints(20).colors (0, 109, 109, 255) defaultPalette.GetControlPoints(20).position 0.69 defaultPalette.GetControlPoints(21).colors (150, 0, 150, 255) defaultPalette.GetControlPoints(21).position 0.724 defaultPalette.GetControlPoints(22).colors (150, 150, 0, 255) defaultPalette.GetControlPoints(22).position 0.759 defaultPalette.GetControlPoints(23).colors (150, 84, 0, 255) defaultPalette.GetControlPoints(23).position 0.793 defaultPalette.GetControlPoints(24).colors (160, 0, 79, 255) defaultPalette.GetControlPoints(24).position 0.828 defaultPalette.GetControlPoints(25).colors (255, 104, 28, 255) defaultPalette.GetControlPoints(25).position 0.862 defaultPalette.GetControlPoints(26).colors (0, 170, 81, 255) defaultPalette.GetControlPoints(26).position 0.897 defaultPalette.GetControlPoints(27).colors (68, 255, 124, 255) defaultPalette.GetControlPoints(27).position 0.931 defaultPalette.GetControlPoints(28).colors (0, 130, 255, 255) defaultPalette.GetControlPoints(28).position 0.966 defaultPalette.GetControlPoints(29).colors (130, 0, 255, 255) defaultPalette.GetControlPoints(29).position 1 defaultPalette.smoothing None, Linear, CubicSpline defaultPalette.equalSpacingFlag 1 defaultPalette.discreteFlag 1 defaultPalette.categoryName “Standard” changedColors () colorType ColorByMultipleColors, ColorBySingleColor, ColorByColorTable colorTableName “Default” invertColorTable 0 legendFlag 1 lineWidth 0 singleColor (255, 0, 0, 255) SetMultiColor(0, (255, 0, 0, 255)) SetMultiColor(1, (0, 255, 0, 255)) SetMultiColor(2, (0, 0, 255, 255)) SetMultiColor(3, (0, 255, 255, 255)) SetMultiColor(4, (255, 0, 255, 255)) SetMultiColor(5, (255, 255, 0, 255)) SetMultiColor(6, (255, 135, 0, 255)) SetMultiColor(7, (255, 0, 135, 255)) SetMultiColor(8, (168, 168, 168, 255)) SetMultiColor(9, (255, 68, 68, 255)) contourNLevels 10 contourValue () contourPercent () contourMethod Level, Value, Percent minFlag 0 maxFlag 0 min 0 max 1 scaling Linear, Log wireframe 0
CoordSwap: CoordSwapAttributes()¶
Attribute Default/Allowed Values newCoord1 Coord1, Coord2, Coord3 newCoord2 Coord2, Coord1, Coord3 newCoord3 Coord3, Coord1, Coord2
CreateBonds: CreateBondsAttributes()¶
Attribute Default/Allowed Values elementVariable “element” atomicNumber1 (1, -1) atomicNumber2 (-1, -1) minDist (0.4, 0.4) maxDist (1.2, 1.9) maxBondsClamp 10 addPeriodicBonds 0 useUnitCellVectors 1 periodicInX 1 periodicInY 1 periodicInZ 1 xVector (1, 0, 0) yVector (0, 1, 0) zVector (0, 0, 1)
Curve: CurveAttributes()¶
Attribute Default/Allowed Values showLines 1 lineWidth 0 showPoints 0 symbol Point, TriangleUp, TriangleDown, Square, Circle, Plus, X pointSize 5 pointFillMode Static, Dynamic pointStride 1 symbolDensity 50 curveColorSource Cycle, Custom curveColor (0, 0, 0, 255) showLegend 1 showLabels 1 designator “” doBallTimeCue 0 ballTimeCueColor (0, 0, 0, 255) timeCueBallSize 0.01 doLineTimeCue 0 lineTimeCueColor (0, 0, 0, 255) lineTimeCueWidth 0 doCropTimeCue 0 timeForTimeCue 0 fillMode NoFill, Solid, HorizontalGradient, VerticalGradient fillColor1 (255, 0, 0, 255) fillColor2 (255, 100, 100, 255) polarToCartesian 0 polarCoordinateOrder R_Theta, Theta_R angleUnits Radians, Degrees
Cylinder: CylinderAttributes()¶
Attribute Default/Allowed Values point1 (0, 0, 0) point2 (1, 0, 0) radius 1 inverse 0
DataBinning: DataBinningAttributes()¶
Attribute Default/Allowed Values numDimensions One, Two, Three dim1BinBasedOn Variable, X, Y, Z dim1Var “default” dim1SpecifyRange 0 dim1MinRange 0 dim1MaxRange 1 dim1NumBins 50 dim2BinBasedOn Variable, X, Y, Z dim2Var “default” dim2SpecifyRange 0 dim2MinRange 0 dim2MaxRange 1 dim2NumBins 50 dim3BinBasedOn Variable, X, Y, Z dim3Var “default” dim3SpecifyRange 0 dim3MinRange 0 dim3MaxRange 1 dim3NumBins 50 outOfBoundsBehavior Clamp, Discard reductionOperator Average, Minimum, Maximum, StandardDeviation, Variance, Sum, Count, RMS, PDF varForReduction “default” emptyVal 0 outputType OutputOnBins, OutputOnInputMesh removeEmptyValFromCurve 1
DualMesh: DualMeshAttributes()¶
Attribute Default/Allowed Values mode Auto, NodesToZones, ZonesToNodes
Elevate: ElevateAttributes()¶
Attribute Default/Allowed Values useXYLimits Auto, Never, Always limitsMode OriginalData, CurrentPlot scaling Linear, Log, Skew skewFactor 1 minFlag 0 min 0 maxFlag 0 max 1 zeroFlag 0 variable “default”
EllipsoidSlice: EllipsoidSliceAttributes()¶
Attribute Default/Allowed Values origin (0, 0, 0) radii (1, 1, 1) rotationAngle (0, 0, 0)
Explode: ExplodeAttributes()¶
Attribute Default/Allowed Values explosionType Point, Plane, Cylinder explosionPoint (0, 0, 0) planePoint (0, 0, 0) planeNorm (0, 0, 0) cylinderPoint1 (0, 0, 0) cylinderPoint2 (0, 0, 0) materialExplosionFactor 1 material “” cylinderRadius 0 explodeMaterialCells 0 cellExplosionFactor 1 explosionPattern Impact, Scatter explodeAllCells 0 boundaryNames () explosions does not contain any ExplodeAttributes objects.
ExportDB: ExportDBAttributes()¶
Attribute Default/Allowed Values allTimes 0 dirname “.” filename “visit_ex_db” timeStateFormat “_%04d” db_type “” db_type_fullname “” variables () writeUsingGroups 0 groupSize 48 opts.types () opts.help “”
ExternalSurface: ExternalSurfaceAttributes()¶
Attribute Default/Allowed Values removeGhosts 0 edgesIn2D 1
Extrude: ExtrudeAttributes()¶
Attribute Default/Allowed Values axis (0, 0, 1) byVariable 0 variable “default” length 1 steps 1 preserveOriginalCellNumbers 1
FilledBoundary: FilledBoundaryAttributes()¶
Attribute Default/Allowed Values colorType ColorByMultipleColors, ColorBySingleColor, ColorByColorTable colorTableName “Default” invertColorTable 0 legendFlag 1 lineWidth 0 singleColor (0, 0, 0, 255) boundaryNames () opacity 1 wireframe 0 drawInternal 0 smoothingLevel 0 cleanZonesOnly 0 mixedColor (255, 255, 255, 255) pointSize 0.05 pointType Point, Box, Axis, Icosahedron, Octahedron, Tetrahedron, SphereGeometry, Sphere pointSizeVarEnabled 0 pointSizeVar “default” pointSizePixels 2
Flux: FluxAttributes()¶
Attribute Default/Allowed Values flowField “default” weight 0 weightField “default”
Font: FontAttributes()¶
Attribute Default/Allowed Values font Arial, Courier, Times scale 1 useForegroundColor 1 color (0, 0, 0, 255) bold 0 italic 0
Global: GlobalAttributes()¶
Attribute Default/Allowed Values sources () windows
activeWindow 0 iconifiedFlag 0 autoUpdateFlag 0 replacePlots 0 applyOperator 1 applySelection 1 applyWindow 0 executing 0 windowLayout 1 makeDefaultConfirm 1 cloneWindowOnFirstRef 0 automaticallyAddOperator 0 tryHarderCyclesTimes 0 treatAllDBsAsTimeVarying 0 createMeshQualityExpressions 1 createTimeDerivativeExpressions 1 createVectorMagnitudeExpressions 1 newPlotsInheritSILRestriction 1 userDirForSessionFiles 0 saveCrashRecoveryFile 1 ignoreExtentsFromDbs 0 expandNewPlots 0 userRestoreSessionFile 0 precisionType Native, Float, Double backendType VTK, VTKM removeDuplicateNodes 0
Histogram: HistogramAttributes()¶
Attribute Default/Allowed Values basedOn ManyZonesForSingleVar, ManyVarsForSingleZone histogramType Frequency, Weighted, Variable weightVariable “default” limitsMode OriginalData, CurrentPlot minFlag 0 maxFlag 0 min 0 max 1 numBins 32 domain 0 zone 0 useBinWidths 1 outputType Block, Curve lineWidth 0 color (200, 80, 40, 255) dataScale Linear, Log, SquareRoot binScale Linear, Log, SquareRoot normalizeHistogram 0 computeAsCDF 0
IndexSelect: IndexSelectAttributes()¶
Attribute Default/Allowed Values maxDim ThreeD, OneD, TwoD dim TwoD, OneD, ThreeD xAbsMax -1 xMin 0 xMax -1 xIncr 1 xWrap 0 yAbsMax -1 yMin 0 yMax -1 yIncr 1 yWrap 0 zAbsMax -1 zMin 0 zMax -1 zIncr 1 zWrap 0 useWholeCollection 1 categoryName “Whole” subsetName “Whole”
IntegralCurve: IntegralCurveAttributes()¶
Attribute Default/Allowed Values sourceType SpecifiedPoint, PointList, SpecifiedLine, Circle, SpecifiedPlane, SpecifiedSphere, SpecifiedBox, Selection, FieldData pointSource (0, 0, 0) lineStart (0, 0, 0) lineEnd (1, 0, 0) planeOrigin (0, 0, 0) planeNormal (0, 0, 1) planeUpAxis (0, 1, 0) radius 1 sphereOrigin (0, 0, 0) boxExtents (0, 1, 0, 1, 0, 1) useWholeBox 1 pointList (0, 0, 0, 1, 0, 0, 0, 1, 0) fieldData () sampleDensity0 2 sampleDensity1 2 sampleDensity2 2 dataValue TimeAbsolute, Solid, SeedPointID, Speed, Vorticity, ArcLength, TimeRelative, AverageDistanceFromSeed, CorrelationDistance, Difference, Variable dataVariable “” integrationDirection Forward, Backward, Both, ForwardDirectionless, BackwardDirectionless, BothDirectionless maxSteps 1000 terminateByDistance 0 termDistance 10 terminateByTime 0 termTime 10 maxStepLength 0.1 limitMaximumTimestep 0 maxTimeStep 0.1 relTol 0.0001 absTolSizeType FractionOfBBox, Absolute absTolAbsolute 1e-06 absTolBBox 1e-06 fieldType Default, FlashField, M3DC12DField, M3DC13DField, Nek5000Field, NektarPPField fieldConstant 1 velocitySource (0, 0, 0) integrationType DormandPrince, Euler, Leapfrog, AdamsBashforth, RK4, M3DC12DIntegrator parallelizationAlgorithmType VisItSelects, LoadOnDemand, ParallelStaticDomains, MasterSlave maxProcessCount 10 maxDomainCacheSize 3 workGroupSize 32 pathlines 0 pathlinesOverrideStartingTimeFlag 0 pathlinesOverrideStartingTime 0 pathlinesPeriod 0 pathlinesCMFE POS_CMFE, CONN_CMFE displayGeometry Lines, Tubes, Ribbons cleanupMethod NoCleanup, Merge, Before, After cleanupThreshold 1e-08 cropBeginFlag 0 cropBegin 0 cropEndFlag 0 cropEnd 0 cropValue Time, Distance, StepNumber sampleDistance0 10 sampleDistance1 10 sampleDistance2 10 fillInterior 1 randomSamples 0 randomSeed 0 numberOfRandomSamples 1 issueAdvectionWarnings 1 issueBoundaryWarnings 1 issueTerminationWarnings 1 issueStepsizeWarnings 1 issueStiffnessWarnings 1 issueCriticalPointsWarnings 1 criticalPointThreshold 0.001 correlationDistanceAngTol 5 correlationDistanceMinDistAbsolute 1 correlationDistanceMinDistBBox 0.005 correlationDistanceMinDistType FractionOfBBox, Absolute selection “”
InverseGhostZone: InverseGhostZoneAttributes()¶
Attribute Default/Allowed Values requestGhostZones 1 showDuplicated 1 showEnhancedConnectivity 1 showReducedConnectivity 1 showAMRRefined 1 showExterior 1 showNotApplicable 1
Isosurface: IsosurfaceAttributes()¶
Attribute Default/Allowed Values contourNLevels 10 contourValue () contourPercent () contourMethod Level, Value, Percent minFlag 0 min 0 maxFlag 0 max 1 scaling Linear, Log variable “default”
Isovolume: IsovolumeAttributes()¶
Attribute Default/Allowed Values lbound -1e+37 ubound 1e+37 variable “default”
Keyframe: KeyframeAttributes()¶
Attribute Default/Allowed Values enabled 0 nFrames 1 nFramesWasUserSet 0
LCS: LCSAttributes()¶
Attribute Default/Allowed Values sourceType NativeMesh, RegularGrid Resolution (10, 10, 10) UseDataSetStart Full, Subset StartPosition (0, 0, 0) UseDataSetEnd Full, Subset EndPosition (1, 1, 1) integrationDirection Forward, Backward, Both auxiliaryGrid None, TwoDim, ThreeDim auxiliaryGridSpacing 0.0001 maxSteps 1000 operationType Lyapunov, IntegrationTime, ArcLength, AverageDistanceFromSeed, EigenValue, EigenVector cauchyGreenTensor Right, Left eigenComponent Largest, Smallest, Intermediate, PosShearVector, NegShearVector, PosLambdaShearVector, NegLambdaShearVector eigenWeight 1 operatorType BaseValue, Gradient terminationType Time, Distance, Size terminateBySize 0 termSize 10 terminateByDistance 0 termDistance 10 terminateByTime 0 termTime 10 maxStepLength 0.1 limitMaximumTimestep 0 maxTimeStep 0.1 relTol 0.0001 absTolSizeType FractionOfBBox, Absolute absTolAbsolute 1e-06 absTolBBox 1e-06 fieldType Default, FlashField, M3DC12DField, M3DC13DField, Nek5000Field, NektarPPField fieldConstant 1 velocitySource (0, 0, 0) integrationType DormandPrince, Euler, Leapfrog, AdamsBashforth, RK4, M3DC12DIntegrator clampLogValues 0 parallelizationAlgorithmType VisItSelects, LoadOnDemand, ParallelStaticDomains, MasterSlave maxProcessCount 10 maxDomainCacheSize 3 workGroupSize 32 pathlines 0 pathlinesOverrideStartingTimeFlag 0 pathlinesOverrideStartingTime 0 pathlinesPeriod 0 pathlinesCMFE POS_CMFE, CONN_CMFE thresholdLimit 0.1 radialLimit 0.1 boundaryLimit 0.1 seedLimit 10 issueAdvectionWarnings 1 issueBoundaryWarnings 1 issueTerminationWarnings 1 issueStepsizeWarnings 1 issueStiffnessWarnings 1 issueCriticalPointsWarnings 1 criticalPointThreshold 0.001
Label: LabelAttributes()¶
Attribute Default/Allowed Values legendFlag 1 showNodes 0 showCells 1 restrictNumberOfLabels 1 drawLabelsFacing Front, Back, FrontAndBack labelDisplayFormat Natural, LogicalIndex, Index numberOfLabels 200 textFont1.font Arial, Courier, Times textFont1.scale 4 textFont1.useForegroundColor 1 textFont1.color (255, 0, 0, 255) textFont1.bold 0 textFont1.italic 0 textFont2.font Arial, Courier, Times textFont2.scale 4 textFont2.useForegroundColor 1 textFont2.color (0, 0, 255, 255) textFont2.bold 0 textFont2.italic 0 horizontalJustification HCenter, Left, Right verticalJustification VCenter, Top, Bottom depthTestMode LABEL_DT_AUTO, LABEL_DT_ALWAYS, LABEL_DT_NEVER formatTemplate “%g”
Lagrangian: LagrangianAttributes()¶
Attribute Default/Allowed Values seedPoint (0, 0, 0) numSteps 1000 XAxisSample Step, Time, ArcLength, Speed, Vorticity, Variable YAxisSample Step, Time, ArcLength, Speed, Vorticity, Variable variable “default”
Light: LightAttributes()¶
Attribute Default/Allowed Values enabledFlag 1 type Camera, Ambient, Object direction (0, 0, -1) color (255, 255, 255, 255) brightness 1
LimitCycle: LimitCycleAttributes()¶
Attribute Default/Allowed Values sourceType SpecifiedLine, SpecifiedPlane lineStart (0, 0, 0) lineEnd (1, 0, 0) planeOrigin (0, 0, 0) planeNormal (0, 0, 1) planeUpAxis (0, 1, 0) sampleDensity0 2 sampleDensity1 2 dataValue TimeAbsolute, Solid, SeedPointID, Speed, Vorticity, ArcLength, TimeRelative, AverageDistanceFromSeed, CorrelationDistance, Difference, Variable dataVariable “” integrationDirection Forward, Backward, Both, ForwardDirectionless, BackwardDirectionless, BothDirectionless maxSteps 1000 terminateByDistance 0 termDistance 10 terminateByTime 0 termTime 10 maxStepLength 0.1 limitMaximumTimestep 0 maxTimeStep 0.1 relTol 0.0001 absTolSizeType FractionOfBBox, Absolute absTolAbsolute 1e-06 absTolBBox 1e-06 fieldType Default, FlashField, M3DC12DField, M3DC13DField, Nek5000Field, NektarPPField fieldConstant 1 velocitySource (0, 0, 0) integrationType DormandPrince, Euler, Leapfrog, AdamsBashforth, RK4, M3DC12DIntegrator parallelizationAlgorithmType VisItSelects, LoadOnDemand, ParallelStaticDomains, MasterSlave maxProcessCount 10 maxDomainCacheSize 3 workGroupSize 32 pathlines 0 pathlinesOverrideStartingTimeFlag 0 pathlinesOverrideStartingTime 0 pathlinesPeriod 0 pathlinesCMFE POS_CMFE, CONN_CMFE sampleDistance0 10 sampleDistance1 10 sampleDistance2 10 fillInterior 1 randomSamples 0 randomSeed 0 numberOfRandomSamples 1 forceNodeCenteredData 0 cycleTolerance 1e-06 maxIterations 10 showPartialResults 1 showReturnDistances 0 issueAdvectionWarnings 1 issueBoundaryWarnings 1 issueTerminationWarnings 1 issueStepsizeWarnings 1 issueStiffnessWarnings 1 issueCriticalPointsWarnings 1 criticalPointThreshold 0.001 correlationDistanceAngTol 5 correlationDistanceMinDistAbsolute 1 correlationDistanceMinDistBBox 0.005 correlationDistanceMinDistType FractionOfBBox, Absolute
Lineout: LineoutAttributes()¶
Attribute Default/Allowed Values point1 (0, 0, 0) point2 (1, 1, 0) interactive 0 ignoreGlobal 0 samplingOn 0 numberOfSamplePoints 50 reflineLabels 0
Material: MaterialAttributes()¶
Attribute Default/Allowed Values smoothing 0 forceMIR 0 cleanZonesOnly 0 needValidConnectivity 0 algorithm EquiZ, EquiT, Isovolume, PLIC, Discrete iterationEnabled 0 numIterations 5 iterationDamping 0.4 simplifyHeavilyMixedZones 0 maxMaterialsPerZone 3 isoVolumeFraction 0.5 annealingTime 10
Mesh: MeshAttributes()¶
Attribute Default/Allowed Values legendFlag 1 lineWidth 0 meshColor (0, 0, 0, 255) meshColorSource Foreground, MeshCustom opaqueColorSource Background, OpaqueCustom opaqueMode Auto, On, Off pointSize 0.05 opaqueColor (255, 255, 255, 255) smoothingLevel None, Fast, High pointSizeVarEnabled 0 pointSizeVar “default” pointType Point, Box, Axis, Icosahedron, Octahedron, Tetrahedron, SphereGeometry, Sphere showInternal 0 pointSizePixels 2 opacity 1
MeshManagement: MeshManagementAttributes()¶
Attribute Default/Allowed Values discretizationTolerance (0.02, 0.025, 0.05) discretizationToleranceX () discretizationToleranceY () discretizationToleranceZ () discretizationMode Uniform, Adaptive, MultiPass discretizeBoundaryOnly 0 passNativeCSG 0
Molecule: MoleculeAttributes()¶
Attribute Default/Allowed Values drawAtomsAs SphereAtoms, NoAtoms, ImposterAtoms scaleRadiusBy Fixed, Covalent, Atomic, Variable drawBondsAs CylinderBonds, NoBonds, LineBonds colorBonds ColorByAtom, SingleColor bondSingleColor (128, 128, 128, 255) radiusVariable “default” radiusScaleFactor 1 radiusFixed 0.3 atomSphereQuality Medium, Low, High, Super bondCylinderQuality Medium, Low, High, Super bondRadius 0.12 bondLineWidth 0 elementColorTable “cpk_jmol” residueTypeColorTable “amino_shapely” residueSequenceColorTable “Default” continuousColorTable “Default” legendFlag 1 minFlag 0 scalarMin 0 maxFlag 0 scalarMax 1
MultiCurve: MultiCurveAttributes()¶
Attribute Default/Allowed Values defaultPalette.GetControlPoints(0).colors (255, 0, 0, 255) defaultPalette.GetControlPoints(0).position 0 defaultPalette.GetControlPoints(1).colors (0, 255, 0, 255) defaultPalette.GetControlPoints(1).position 0.034 defaultPalette.GetControlPoints(2).colors (0, 0, 255, 255) defaultPalette.GetControlPoints(2).position 0.069 defaultPalette.GetControlPoints(3).colors (0, 255, 255, 255) defaultPalette.GetControlPoints(3).position 0.103 defaultPalette.GetControlPoints(4).colors (255, 0, 255, 255) defaultPalette.GetControlPoints(4).position 0.138 defaultPalette.GetControlPoints(5).colors (255, 255, 0, 255) defaultPalette.GetControlPoints(5).position 0.172 defaultPalette.GetControlPoints(6).colors (255, 135, 0, 255) defaultPalette.GetControlPoints(6).position 0.207 defaultPalette.GetControlPoints(7).colors (255, 0, 135, 255) defaultPalette.GetControlPoints(7).position 0.241 defaultPalette.GetControlPoints(8).colors (168, 168, 168, 255) defaultPalette.GetControlPoints(8).position 0.276 defaultPalette.GetControlPoints(9).colors (255, 68, 68, 255) defaultPalette.GetControlPoints(9).position 0.31 defaultPalette.GetControlPoints(10).colors (99, 255, 99, 255) defaultPalette.GetControlPoints(10).position 0.345 defaultPalette.GetControlPoints(11).colors (99, 99, 255, 255) defaultPalette.GetControlPoints(11).position 0.379 defaultPalette.GetControlPoints(12).colors (40, 165, 165, 255) defaultPalette.GetControlPoints(12).position 0.414 defaultPalette.GetControlPoints(13).colors (255, 99, 255, 255) defaultPalette.GetControlPoints(13).position 0.448 defaultPalette.GetControlPoints(14).colors (255, 255, 99, 255) defaultPalette.GetControlPoints(14).position 0.483 defaultPalette.GetControlPoints(15).colors (255, 170, 99, 255) defaultPalette.GetControlPoints(15).position 0.517 defaultPalette.GetControlPoints(16).colors (170, 79, 255, 255) defaultPalette.GetControlPoints(16).position 0.552 defaultPalette.GetControlPoints(17).colors (150, 0, 0, 255) defaultPalette.GetControlPoints(17).position 0.586 defaultPalette.GetControlPoints(18).colors (0, 150, 0, 255) defaultPalette.GetControlPoints(18).position 0.621 defaultPalette.GetControlPoints(19).colors (0, 0, 150, 255) defaultPalette.GetControlPoints(19).position 0.655 defaultPalette.GetControlPoints(20).colors (0, 109, 109, 255) defaultPalette.GetControlPoints(20).position 0.69 defaultPalette.GetControlPoints(21).colors (150, 0, 150, 255) defaultPalette.GetControlPoints(21).position 0.724 defaultPalette.GetControlPoints(22).colors (150, 150, 0, 255) defaultPalette.GetControlPoints(22).position 0.759 defaultPalette.GetControlPoints(23).colors (150, 84, 0, 255) defaultPalette.GetControlPoints(23).position 0.793 defaultPalette.GetControlPoints(24).colors (160, 0, 79, 255) defaultPalette.GetControlPoints(24).position 0.828 defaultPalette.GetControlPoints(25).colors (255, 104, 28, 255) defaultPalette.GetControlPoints(25).position 0.862 defaultPalette.GetControlPoints(26).colors (0, 170, 81, 255) defaultPalette.GetControlPoints(26).position 0.897 defaultPalette.GetControlPoints(27).colors (68, 255, 124, 255) defaultPalette.GetControlPoints(27).position 0.931 defaultPalette.GetControlPoints(28).colors (0, 130, 255, 255) defaultPalette.GetControlPoints(28).position 0.966 defaultPalette.GetControlPoints(29).colors (130, 0, 255, 255) defaultPalette.GetControlPoints(29).position 1 defaultPalette.smoothing None, Linear, CubicSpline defaultPalette.equalSpacingFlag 1 defaultPalette.discreteFlag 1 defaultPalette.categoryName “Standard” changedColors () colorType ColorByMultipleColors, ColorBySingleColor singleColor (255, 0, 0, 255) SetMultiColor(0, (255, 0, 0, 255)) SetMultiColor(1, (0, 255, 0, 255)) SetMultiColor(2, (0, 0, 255, 255)) SetMultiColor(3, (0, 255, 255, 255)) SetMultiColor(4, (255, 0, 255, 255)) SetMultiColor(5, (255, 255, 0, 255)) SetMultiColor(6, (255, 135, 0, 255)) SetMultiColor(7, (255, 0, 135, 255)) SetMultiColor(8, (168, 168, 168, 255)) SetMultiColor(9, (255, 68, 68, 255)) SetMultiColor(10, (99, 255, 99, 255)) SetMultiColor(11, (99, 99, 255, 255)) SetMultiColor(12, (40, 165, 165, 255)) SetMultiColor(13, (255, 99, 255, 255)) SetMultiColor(14, (255, 255, 99, 255)) SetMultiColor(15, (255, 170, 99, 255)) lineWidth 0 yAxisTitleFormat “%g” useYAxisTickSpacing 0 yAxisTickSpacing 1 displayMarkers 1 markerScale 1 markerLineWidth 0 markerVariable “default” displayIds 0 idVariable “default” legendFlag 1
MultiresControl: MultiresControlAttributes()¶
Attribute Default/Allowed Values resolution 0 maxResolution 1 info “”
OnionPeel: OnionPeelAttributes()¶
Attribute Default/Allowed Values adjacencyType Node, Face useGlobalId 0 categoryName “Whole” subsetName “Whole” index
logical 0 requestedLayer 0 seedType SeedCell, SeedNode honorOriginalMesh 1
ParallelCoordinates: ParallelCoordinatesAttributes()¶
Attribute Default/Allowed Values scalarAxisNames () visualAxisNames () extentMinima () extentMaxima () drawLines 1 linesColor (128, 0, 0, 255) drawContext 1 contextGamma 2 contextNumPartitions 128 contextColor (0, 220, 0, 255) drawLinesOnlyIfExtentsOn 1 unifyAxisExtents 0 linesNumPartitions 512 focusGamma 4 drawFocusAs BinsOfConstantColor, IndividualLines, BinsColoredByPopulation
PersistentParticles: PersistentParticlesAttributes()¶
Attribute Default/Allowed Values startIndex 0 stopIndex 1 stride 1 startPathType Absolute, Relative stopPathType Absolute, Relative traceVariableX “default” traceVariableY “default” traceVariableZ “default” connectParticles 0 showPoints 0 indexVariable “default”
Poincare: PoincareAttributes()¶
Attribute Default/Allowed Values opacityType Explicit, ColorTable opacity 1 minPunctures 50 maxPunctures 500 puncturePlotType Single, Double maxSteps 1000 terminateByTime 0 termTime 10 puncturePeriodTolerance 0.01 puncturePlane Poloidal, Toroidal, Arbitrary sourceType SpecifiedPoint, PointList, SpecifiedLine pointSource (0, 0, 0) pointList (0, 0, 0, 1, 0, 0, 0, 1, 0) lineStart (0, 0, 0) lineEnd (1, 0, 0) pointDensity 1 fieldType Default, FlashField, M3DC12DField, M3DC13DField, Nek5000Field, NektarPPField forceNodeCenteredData 0 fieldConstant 1 velocitySource (0, 0, 0) integrationType AdamsBashforth, Euler, Leapfrog, DormandPrince, RK4, M3DC12DIntegrator coordinateSystem Cartesian, Cylindrical maxStepLength 0.1 limitMaximumTimestep 0 maxTimeStep 0.1 relTol 0.0001 absTolSizeType FractionOfBBox, Absolute absTolAbsolute 1e-05 absTolBBox 1e-06 analysis Normal, None maximumToroidalWinding 0 overrideToroidalWinding 0 overridePoloidalWinding 0 windingPairConfidence 0.9 rationalSurfaceFactor 0.1 overlaps Remove, Raw, Merge, Smooth meshType Curves, Surfaces numberPlanes 1 singlePlane 0 min 0 max 0 minFlag 0 maxFlag 0 colorType ColorByColorTable, ColorBySingleColor singleColor (0, 0, 0, 255) colorTableName “Default” dataValue SafetyFactorQ, Solid, SafetyFactorP, SafetyFactorQ_NotP, SafetyFactorP_NotQ, ToroidalWindings, PoloidalWindingsQ, PoloidalWindingsP, FieldlineOrder, PointOrder, PlaneOrder, WindingGroupOrder, WindingPointOrder, WindingPointOrderModulo showRationalSurfaces 0 RationalSurfaceMaxIterations 2 showOPoints 0 OPointMaxIterations 2 showXPoints 0 XPointMaxIterations 2 performOLineAnalysis 0 OLineToroidalWinding 1 OLineAxisFileName “” showChaotic 0 showIslands 0 SummaryFlag 1 verboseFlag 0 show1DPlots 0 showLines 1 showPoints 0 parallelizationAlgorithmType VisItSelects, LoadOnDemand, ParallelStaticDomains, MasterSlave maxProcessCount 10 maxDomainCacheSize 3 workGroupSize 32 pathlines 0 pathlinesOverrideStartingTimeFlag 0 pathlinesOverrideStartingTime 0 pathlinesPeriod 0 pathlinesCMFE POS_CMFE, CONN_CMFE issueTerminationWarnings 1 issueStepsizeWarnings 1 issueStiffnessWarnings 1 issueCriticalPointsWarnings 1 criticalPointThreshold 0.001
Printer: PrinterAttributes()¶
Attribute Default/Allowed Values printerName “” printProgram “lpr” documentName “untitled” creator “” numCopies 1 portrait 1 printColor 1 outputToFile 0 outputToFileName “untitled” pageSize 2
Process: ProcessAttributes()¶
Attribute Default/Allowed Values pids () ppids () hosts () isParallel 0 memory () times ()
Project: ProjectAttributes()¶
Attribute Default/Allowed Values projectionType XYCartesian, ZYCartesian, XZCartesian, XRCylindrical, YRCylindrical, ZRCylindrical vectorTransformMethod AsDirection, None, AsPoint, AsDisplacement
Pseudocolor: PseudocolorAttributes()¶
Attribute Default/Allowed Values scaling Linear, Log, Skew skewFactor 1 limitsMode OriginalData, CurrentPlot minFlag 0 min 0 useBelowMinColor 0 belowMinColor (0, 0, 0, 255) maxFlag 0 max 1 useAboveMaxColor 0 aboveMaxColor (0, 0, 0, 255) centering Natural, Nodal, Zonal colorTableName “hot” invertColorTable 0 opacityType FullyOpaque, ColorTable, Constant, Ramp, VariableRange opacityVariable “” opacity 1 opacityVarMin 0 opacityVarMax 1 opacityVarMinFlag 0 opacityVarMaxFlag 0 pointSize 0.05 pointType Point, Box, Axis, Icosahedron, Octahedron, Tetrahedron, SphereGeometry, Sphere pointSizeVarEnabled 0 pointSizeVar “default” pointSizePixels 2 lineType Line, Tube, Ribbon lineWidth 0 tubeResolution 10 tubeRadiusSizeType FractionOfBBox, Absolute tubeRadiusAbsolute 0.125 tubeRadiusBBox 0.005 tubeRadiusVarEnabled 0 tubeRadiusVar “” tubeRadiusVarRatio 10 tailStyle None, Spheres, Cones headStyle None, Spheres, Cones endPointRadiusSizeType FractionOfBBox, Absolute endPointRadiusAbsolute 0.125 endPointRadiusBBox 0.05 endPointResolution 10 endPointRatio 5 endPointRadiusVarEnabled 0 endPointRadiusVar “” endPointRadiusVarRatio 10 renderSurfaces 1 renderWireframe 0 renderPoints 0 smoothingLevel 0 legendFlag 1 lightingFlag 1 wireframeColor (0, 0, 0, 0) pointColor (0, 0, 0, 0)
RadialResample: RadialResampleAttributes()¶
Attribute Default/Allowed Values isFast 0 minTheta 0 maxTheta 90 deltaTheta 5 radius 0.5 deltaRadius 0.05 center (0.5, 0.5, 0.5) is3D 1 minAzimuth 0 maxAzimuth 180 deltaAzimuth 5
Reflect: ReflectAttributes()¶
Attribute Default/Allowed Values octant PXPYPZ, NXPYPZ, PXNYPZ, NXNYPZ, PXPYNZ, NXPYNZ, PXNYNZ, NXNYNZ useXBoundary 1 specifiedX 0 useYBoundary 1 specifiedY 0 useZBoundary 1 specifiedZ 0 reflections (1, 0, 1, 0, 0, 0, 0, 0) planePoint (0, 0, 0) planeNormal (0, 0, 0) reflectType Axis, Plane
Remap: RemapAttributes()¶
Attribute Default/Allowed Values useExtents 1 startX 0 endX 1 cellsX 10 startY 0 endY 1 cellsY 10 is3D 1 startZ 0 endZ 1 cellsZ 10 variableType intrinsic, extrinsic
Rendering: RenderingAttributes()¶
Attribute Default/Allowed Values antialiasing 0 orderComposite 1 depthCompositeThreads 2 depthCompositeBlocking 65536 alphaCompositeThreads 2 alphaCompositeBlocking 65536 depthPeeling 0 occlusionRatio 0 numberOfPeels 16 multiresolutionMode 0 multiresolutionCellSize 0.002 geometryRepresentation Surfaces, Wireframe, Points stereoRendering 0 stereoType CrystalEyes, RedBlue, Interlaced, RedGreen notifyForEachRender 0 scalableActivationMode Auto, Never, Always scalableAutoThreshold 2000000 specularFlag 0 specularCoeff 0.6 specularPower 10 specularColor (255, 255, 255, 255) doShadowing 0 shadowStrength 0.5 doDepthCueing 0 depthCueingAutomatic 1 startCuePoint (-10, 0, 0) endCuePoint (10, 0, 0) compressionActivationMode Never, Always, Auto colorTexturingFlag 1 compactDomainsActivationMode Never, Always, Auto compactDomainsAutoThreshold 256 osprayRendering 0 ospraySPP 1 osprayAO 0 osprayShadows 0
Replicate: ReplicateAttributes()¶
Attribute Default/Allowed Values useUnitCellVectors 0 xVector (1, 0, 0) yVector (0, 1, 0) zVector (0, 0, 1) xReplications 1 yReplications 1 zReplications 1 mergeResults 1 replicateUnitCellAtoms 0 shiftPeriodicAtomOrigin 0 newPeriodicOrigin (0, 0, 0)
Resample: ResampleAttributes()¶
Attribute Default/Allowed Values useExtents 1 startX 0 endX 1 samplesX 10 startY 0 endY 1 samplesY 10 is3D 1 startZ 0 endZ 1 samplesZ 10 tieResolver random, largest, smallest tieResolverVariable “default” defaultValue 0 distributedResample 1 cellCenteredOutput 0
Revolve: RevolveAttributes()¶
Attribute Default/Allowed Values meshType Auto, XY, RZ, ZR autoAxis 1 axis (1, 0, 0) startAngle 0 stopAngle 360 steps 30
SPHResample: SPHResampleAttributes()¶
Attribute Default/Allowed Values minX 0 maxX 1 xnum 10 minY 0 maxY 1 ynum 10 minZ 0 maxZ 1 znum 10 tensorSupportVariable “H” weightVariable “mass” RK 1
SaveWindow: SaveWindowAttributes()¶
Attribute Default/Allowed Values outputToCurrentDirectory 1 outputDirectory “.” fileName “visit” family 1 format PNG, BMP, CURVE, JPEG, OBJ, POSTSCRIPT, POVRAY, PPM, RGB, STL, TIFF, ULTRA, VTK, PLY, EXR width 1024 height 1024 screenCapture 0 saveTiled 0 quality 80 progressive 0 binary 0 stereo 0 compression None, PackBits, Jpeg, Deflate, LZW forceMerge 0 resConstraint ScreenProportions, NoConstraint, EqualWidthHeight pixelData 1 advancedMultiWindowSave 0 subWindowAtts.win1.position (0, 0) subWindowAtts.win1.size (128, 128) subWindowAtts.win1.layer 0 subWindowAtts.win1.transparency 0 subWindowAtts.win1.omitWindow 0 subWindowAtts.win2.position (0, 0) subWindowAtts.win2.size (128, 128) subWindowAtts.win2.layer 0 subWindowAtts.win2.transparency 0 subWindowAtts.win2.omitWindow 0 subWindowAtts.win3.position (0, 0) subWindowAtts.win3.size (128, 128) subWindowAtts.win3.layer 0 subWindowAtts.win3.transparency 0 subWindowAtts.win3.omitWindow 0 subWindowAtts.win4.position (0, 0) subWindowAtts.win4.size (128, 128) subWindowAtts.win4.layer 0 subWindowAtts.win4.transparency 0 subWindowAtts.win4.omitWindow 0 subWindowAtts.win5.position (0, 0) subWindowAtts.win5.size (128, 128) subWindowAtts.win5.layer 0 subWindowAtts.win5.transparency 0 subWindowAtts.win5.omitWindow 0 subWindowAtts.win6.position (0, 0) subWindowAtts.win6.size (128, 128) subWindowAtts.win6.layer 0 subWindowAtts.win6.transparency 0 subWindowAtts.win6.omitWindow 0 subWindowAtts.win7.position (0, 0) subWindowAtts.win7.size (128, 128) subWindowAtts.win7.layer 0 subWindowAtts.win7.transparency 0 subWindowAtts.win7.omitWindow 0 subWindowAtts.win8.position (0, 0) subWindowAtts.win8.size (128, 128) subWindowAtts.win8.layer 0 subWindowAtts.win8.transparency 0 subWindowAtts.win8.omitWindow 0 subWindowAtts.win9.position (0, 0) subWindowAtts.win9.size (128, 128) subWindowAtts.win9.layer 0 subWindowAtts.win9.transparency 0 subWindowAtts.win9.omitWindow 0 subWindowAtts.win10.position (0, 0) subWindowAtts.win10.size (128, 128) subWindowAtts.win10.layer 0 subWindowAtts.win10.transparency 0 subWindowAtts.win10.omitWindow 0 subWindowAtts.win11.position (0, 0) subWindowAtts.win11.size (128, 128) subWindowAtts.win11.layer 0 subWindowAtts.win11.transparency 0 subWindowAtts.win11.omitWindow 0 subWindowAtts.win12.position (0, 0) subWindowAtts.win12.size (128, 128) subWindowAtts.win12.layer 0 subWindowAtts.win12.transparency 0 subWindowAtts.win12.omitWindow 0 subWindowAtts.win13.position (0, 0) subWindowAtts.win13.size (128, 128) subWindowAtts.win13.layer 0 subWindowAtts.win13.transparency 0 subWindowAtts.win13.omitWindow 0 subWindowAtts.win14.position (0, 0) subWindowAtts.win14.size (128, 128) subWindowAtts.win14.layer 0 subWindowAtts.win14.transparency 0 subWindowAtts.win14.omitWindow 0 subWindowAtts.win15.position (0, 0) subWindowAtts.win15.size (128, 128) subWindowAtts.win15.layer 0 subWindowAtts.win15.transparency 0 subWindowAtts.win15.omitWindow 0 subWindowAtts.win16.position (0, 0) subWindowAtts.win16.size (128, 128) subWindowAtts.win16.layer 0 subWindowAtts.win16.transparency 0 subWindowAtts.win16.omitWindow 0 opts.types () opts.help “”
Scatter: ScatterAttributes()¶
Attribute Default/Allowed Values var1 “default” var1Role Coordinate0, Coordinate1, Coordinate2, Color, None var1MinFlag 0 var1MaxFlag 0 var1Min 0 var1Max 1 var1Scaling Linear, Log, Skew var1SkewFactor 1 var2Role Coordinate1, Coordinate0, Coordinate2, Color, None var2 “default” var2MinFlag 0 var2MaxFlag 0 var2Min 0 var2Max 1 var2Scaling Linear, Log, Skew var2SkewFactor 1 var3Role None, Coordinate0, Coordinate1, Coordinate2, Color var3 “default” var3MinFlag 0 var3MaxFlag 0 var3Min 0 var3Max 1 var3Scaling Linear, Log, Skew var3SkewFactor 1 var4Role None, Coordinate0, Coordinate1, Coordinate2, Color var4 “default” var4MinFlag 0 var4MaxFlag 0 var4Min 0 var4Max 1 var4Scaling Linear, Log, Skew var4SkewFactor 1 pointSize 0.05 pointSizePixels 1 pointType Point, Box, Axis, Icosahedron, Octahedron, Tetrahedron, SphereGeometry, Sphere scaleCube 1 colorType ColorByForegroundColor, ColorBySingleColor, ColorByColorTable singleColor (255, 0, 0, 255) colorTableName “Default” invertColorTable 0 legendFlag 1
Slice: SliceAttributes()¶
Attribute Default/Allowed Values originType Intercept, Point, Percent, Zone, Node originPoint (0, 0, 0) originIntercept 0 originPercent 0 originZone 0 originNode 0 normal (0, -1, 0) axisType YAxis, XAxis, ZAxis, Arbitrary, ThetaPhi upAxis (0, 0, 1) project2d 1 interactive 1 flip 0 originZoneDomain 0 originNodeDomain 0 meshName “default” theta 0 phi 0
SmoothOperator: SmoothOperatorAttributes()¶
Attribute Default/Allowed Values numIterations 20 relaxationFactor 0.01 convergence 0 maintainFeatures 1 featureAngle 45 edgeAngle 15 smoothBoundaries 0
Spreadsheet: SpreadsheetAttributes()¶
Attribute Default/Allowed Values subsetName “Whole” formatString “%1.6f” useColorTable 0 colorTableName “Default” showTracerPlane 1 tracerColor (255, 0, 0, 150) normal Z, X, Y sliceIndex 0 spreadsheetFont “Courier,12,-1,5,50,0,0,0,0,0” showPatchOutline 1 showCurrentCellOutline 0 currentPickType 0 currentPickLetter “” pastPickLetters ()
StatisticalTrends: StatisticalTrendsAttributes()¶
Attribute Default/Allowed Values startIndex 0 stopIndex 1 stride 1 startTrendType Absolute, Relative stopTrendType Absolute, Relative statisticType Mean, Sum, Variance, StandardDeviation, Slope, Residuals trendAxis Step, Time, Cycle variableSource Default, OperatorExpression
SubdivideQuads: SubdivideQuadsAttributes()¶
Attribute Default/Allowed Values threshold 0.500002 maxSubdivs 4 fanOutPoints 1 doTriangles 0 variable “default”
Subset: SubsetAttributes()¶
Attribute Default/Allowed Values colorType ColorByMultipleColors, ColorBySingleColor, ColorByColorTable colorTableName “Default” invertColorTable 0 legendFlag 1 lineWidth 0 singleColor (0, 0, 0, 255) subsetNames () opacity 1 wireframe 0 drawInternal 0 smoothingLevel 0 pointSize 0.05 pointType Point, Box, Axis, Icosahedron, Octahedron, Tetrahedron, SphereGeometry, Sphere pointSizeVarEnabled 0 pointSizeVar “default” pointSizePixels 2
Tensor: TensorAttributes()¶
Attribute Default/Allowed Values useStride 0 stride 1 nTensors 400 scale 0.25 scaleByMagnitude 1 autoScale 1 colorByEigenvalues 1 useLegend 1 tensorColor (0, 0, 0, 255) colorTableName “Default” invertColorTable 0
Threshold: ThresholdAttributes()¶
Attribute Default/Allowed Values outputMeshType 0 boundsInputType 0 listedVarNames (“default”) zonePortions () lowerBounds () upperBounds () defaultVarName “default” defaultVarIsScalar 0 boundsRange ()
Transform: TransformAttributes()¶
Attribute Default/Allowed Values doRotate 0 rotateOrigin (0, 0, 0) rotateAxis (0, 0, 1) rotateAmount 0 rotateType Deg, Rad doScale 0 scaleOrigin (0, 0, 0) scaleX 1 scaleY 1 scaleZ 1 doTranslate 0 translateX 0 translateY 0 translateZ 0 transformType Similarity, Coordinate, Linear inputCoordSys Cartesian, Cylindrical, Spherical outputCoordSys Spherical, Cartesian, Cylindrical continuousPhi 0 m00 1 m01 0 m02 0 m03 0 m10 0 m11 1 m12 0 m13 0 m20 0 m21 0 m22 1 m23 0 m30 0 m31 0 m32 0 m33 1 invertLinearTransform 0 vectorTransformMethod AsDirection, None, AsPoint, AsDisplacement transformVectors 1
TriangulateRegularPoints: TriangulateRegularPointsAttributes()¶
Attribute Default/Allowed Values useXGridSpacing 0 xGridSpacing 1 useYGridSpacing 0 yGridSpacing 1
Tube: TubeAttributes()¶
Attribute Default/Allowed Values scaleByVarFlag 0 tubeRadiusType FractionOfBBox, Absolute radiusFractionBBox 0.01 radiusAbsolute 1 scaleVariable “default” fineness 5 capping 0
Vector: VectorAttributes()¶
Attribute Default/Allowed Values glyphLocation AdaptsToMeshResolution, UniformInSpace useStride 0 stride 1 nVectors 400 lineWidth 0 scale 0.25 scaleByMagnitude 1 autoScale 1 headSize 0.25 headOn 1 colorByMag 1 useLegend 1 vectorColor (0, 0, 0, 255) colorTableName “Default” invertColorTable 0 vectorOrigin Tail, Head, Middle minFlag 0 maxFlag 0 limitsMode OriginalData, CurrentPlot min 0 max 1 lineStem Line, Cylinder geometryQuality Fast, High stemWidth 0.08 origOnly 1 glyphType Arrow, Ellipsoid animationStep 0
View: ViewAttributes()¶
Attribute Default/Allowed Values viewNormal (0, 0, 1) focus (0, 0, 0) viewUp (0, 1, 0) viewAngle 30 setScale 0 parallelScale 1 nearPlane 0.001 farPlane 100 imagePan (0, 0) imageZoom 1 perspective 1 windowCoords (0, 0, 1, 1) viewportCoords (0.1, 0.1, 0.9, 0.9) eyeAngle 2
View2D: View2DAttributes()¶
Attribute Default/Allowed Values windowCoords (0, 1, 0, 1) viewportCoords (0.2, 0.95, 0.15, 0.95) fullFrameActivationMode Auto, On, Off fullFrameAutoThreshold 100 xScale LINEAR, LOG yScale LINEAR, LOG windowValid 0
View3D: View3DAttributes()¶
Attribute Default/Allowed Values viewNormal (0, 0, 1) focus (0, 0, 0) viewUp (0, 1, 0) viewAngle 30 parallelScale 0.5 nearPlane -0.5 farPlane 0.5 imagePan (0, 0) imageZoom 1 perspective 1 eyeAngle 2 centerOfRotationSet 0 centerOfRotation (0, 0, 0) axis3DScaleFlag 0 axis3DScales (1, 1, 1) shear (0, 0, 1) windowValid 0
ViewAxisArray: ViewAxisArrayAttributes()¶
Attribute Default/Allowed Values domainCoords (0, 1) rangeCoords (0, 1) viewportCoords (0.15, 0.9, 0.1, 0.85)
ViewCurve: ViewCurveAttributes()¶
Attribute Default/Allowed Values domainCoords (0, 1) rangeCoords (0, 1) viewportCoords (0.2, 0.95, 0.15, 0.95) domainScale LINEAR, LOG rangeScale LINEAR, LOG
Volume: VolumeAttributes()¶
Attribute Default/Allowed Values osprayShadowsEnabledFlag 0 osprayUseGridAcceleratorFlag 0 osprayPreIntegrationFlag 0 ospraySingleShadeFlag 0 osprayOneSidedLightingFlag 0 osprayAoTransparencyEnabledFlag 0 ospraySpp 1 osprayAoSamples 0 osprayAoDistance 100000 osprayMinContribution 0.001 legendFlag 1 lightingFlag 1 colorControlPoints.GetControlPoints(0).colors (0, 0, 255, 255) colorControlPoints.GetControlPoints(0).position 0 colorControlPoints.GetControlPoints(1).colors (0, 255, 255, 255) colorControlPoints.GetControlPoints(1).position 0.25 colorControlPoints.GetControlPoints(2).colors (0, 255, 0, 255) colorControlPoints.GetControlPoints(2).position 0.5 colorControlPoints.GetControlPoints(3).colors (255, 255, 0, 255) colorControlPoints.GetControlPoints(3).position 0.75 colorControlPoints.GetControlPoints(4).colors (255, 0, 0, 255) colorControlPoints.GetControlPoints(4).position 1 colorControlPoints.smoothing Linear, None, CubicSpline colorControlPoints.equalSpacingFlag 0 colorControlPoints.discreteFlag 0 colorControlPoints.categoryName “” opacityAttenuation 1 opacityMode FreeformMode, GaussianMode, ColorTableMode controlPoints does not contain any GaussianControlPoint objects. resampleFlag 1 resampleTarget 1000000 opacityVariable “default” compactVariable “default” freeformOpacity (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255) useColorVarMin 0 colorVarMin 0 useColorVarMax 0 colorVarMax 0 useOpacityVarMin 0 opacityVarMin 0 useOpacityVarMax 0 opacityVarMax 0 smoothData 0 samplesPerRay 500 rendererType Default, RayCasting, RayCastingIntegration, RayCastingSLIVR, RayCastingOSPRay gradientType SobelOperator, CenteredDifferences scaling Linear, Log, Skew skewFactor 1 limitsMode OriginalData, CurrentPlot sampling Rasterization, KernelBased, Trilinear rendererSamples 3 lowGradientLightingReduction Lower, Off, Lowest, Low, Medium, High, Higher, Highest lowGradientLightingClampFlag 0 lowGradientLightingClampValue 1 materialProperties (0.4, 0.75, 0, 15)